Most pages that promise WPC louver prices hand you a range like ₹100 to ₹600 per sq ft and stop there. A range that wide is useless. It covers a thin imported PVC imitation and a Century Ply fluted plank in the same sentence, and it tells you nothing about what your wall will actually cost.
So here are real numbers instead. Everything below is a live selling price from our Bengaluru catalogue, verified on the date at the bottom of this page. Each figure is attached to a product code you can look up and buy.
The short answer
Genuine branded WPC louvers and charcoal panels in India work out to roughly ₹210 to ₹300 per sq ft at the panel level. Per piece, the range runs from ₹699 for entry E3 Clads profiles up to ₹2,699 for wide-format Century planks.
A standard 10 ft by 8 ft feature wall costs about ₹21,500 to ₹29,000 in Century material. E3 Clads entry ranges bring that down considerably.
Clips, adhesive, edge trims and labour sit on top. Those are where most budgets quietly break, so they get their own section further down.
Century Ply WPC Louvers : Full Price List
Century is the most specified WPC brand in Indian interiors, and the pricing is consistent across finishes. What changes is the profile.
| Series | MRP | Our Price | Price / sq.ft | Coverage |
|---|---|---|---|---|
| TROIKA | 1799 | 1329 | 218 | 6.08 sq.ft. |
| SOLE | 1950 | 1598 | 301 | 5.3 sq.ft |
| DEUCE | 2050 | 1798 | 296 | 6.08 sq.ft |
| SPLAY | 3250 | 2697 | 210 | 12.87 sq.ft |
Coverage figures come from dividing the piece price by the published per sq ft rate. SOLE and DEUCE cover the same area per panel, so the ₹200 gap between them buys you a different profile, not more material.
SPLAY looks expensive per piece and is the cheapest per sq ft on the list. That is the single most misread thing in this category, and it deserves its own explanation.
Why ₹/piece and ₹/sq ft tell different stories
A SPLAY plank is roughly 16.25 inches wide. A DEUCE louver is roughly 7.67 inches. Both run 9.5 ft long. So one SPLAY covers about twice the wall that one DEUCE does, which is why ₹2,699 per piece works out cheaper per square foot than ₹1,799 per piece.
If you compare quotes on piece price alone, you will pick the wrong panel. Ask any supplier for the width and the length before you compare anything.
E3 Clads and Urodecor: charcoal and WPC pricing
Per sq ft rates for these vary by profile width, which ranges from 5 inches to 16.25 inches across our catalogue. Each product page carries its own ₹/sq ft figure, and the product listing can be sorted by it directly.
MABEL 9MM at ₹699 is the honest entry point for genuine branded WPC. Anything materially cheaper than that in the market is usually either PVC sold as WPC, or unbranded stock with no warranty behind it.
Work out your own wall
Panel counts rarely divide evenly, and that gap between the arithmetic and the delivery note is where projects go over budget.
Use the free WPC louver panel calculator
Enter your wall width and height and the panel dimensions. The tool returns panel count with a 10% wastage margin already built in, plus the installation clips, silicone adhesive tubes and L-corner strips your job needs.
A worked example: 10 ft by 8 ft wall
Take a standard TV feature wall, 10 ft wide and 8 ft high. That is 80 sq ft.
Multiply 80 by the per sq ft rate and you get ₹16,800 for SPLAY, ₹21,040 for SOLE, ₹23,680 for DEUCE. Those numbers are wrong, and here is why.
Panels come in fixed lengths. Century louvers are 9.5 ft long. Your wall is 8 ft. You cut 1.5 ft off every single panel and throw it away, and you pay for the full panel.
Now count properly. Ten feet is 120 inches.
At 7.67 inches wide, DEUCE needs 16 panels. Sixteen times ₹1,799 is ₹28,784.
At the same width, SOLE also needs 16 panels. Sixteen times ₹1,599 is ₹25,584.
At 16.25 inches wide, SPLAY needs 8 panels. Eight times ₹2,699 is ₹21,592.
So your effective rate on a DEUCE wall is closer to ₹360 per sq ft than the ₹296 on the label. Nobody advertises that number. It is still the number you pay.
Two things follow. Wide-format planks get cheaper as walls get wider, and a wall height close to 9.5 ft wastes almost nothing while an 8 ft wall wastes 16%. If your ceiling
The costs nobody puts in the quote
Panels are the headline number. The accessories are where a quote quietly grows.
Clips are fixed per panel, so narrow profiles need roughly twice as many as wide ones. A 7.67 inch louver puts about twice the panel count on the same wall as a 16.25 inch plank, and the clip count follows. Silicone adhesive runs a tube or two per wall depending on substrate. L-corner finishing strips are needed wherever a panel edge is visible, which means external corners, window reveals and the ends of a partial wall.
Back to Blog
